| Rifeng
Tools |
Specifications |
Description |
| PAP clamping tool |
 |
the jaws are 1014, 1216 and 1620 |
Two mechanical adjustors are installed on the tool so users can control the position of the jaw in order to manage appropriate pressing force during installation, therefore avoid the damage of jaw and fittings. |
|
Pipe cutter |
 |
GJ III |
|
|
| Pipe
cutting tool |
 |
QGQ |
Capable of cutting pipes ranging from
1014 to 6075, normally used for pipes of
sizes no smaller than 3240. |
|
| Pipe
bending tool |
 |
WGQ(6in1) |
For pipes of sizes no bigger than 2632. |
|
| Plastic
reamer |
 |
ZYS-14-32 |
For rounding pipes of sizes no bigger
than 2632 in F1 fitting installation |
|
| Reamer |
 |
ZYD-14-18
|
For bevelling and rounding
pipes of sizes no bigger than 2632 in (F5)press
fitting installation. |
| ZYD-16-20 |
ZYD-20-32 |
|
| Bending
spring |
 |
WH-1014
|
For correspongding pipes. |
WH-1216 |
WH-1418 |
WH-1620 |
WH-2025 |
WH-2632 |
|
Lengthened
T-reamer |
 |
JD-3240(L)
|
For bevelling pipes of sizes
no smaller than
3240 in press fitting (F5)installation. |
JD-4150(L) |
JD-5163(L) |
JD-6075(L) |
|
| T-reamer |
 |
JD-1014
|
For bevelling pipes of sizes
no bigger
than 2632 in press fitting (F5)installation.
For bevelling pipes of sizes no smaller
than 3240 in press fitting (F5)installation. |
JD-1216 |
JD-1418 |
JD-1620 |
JD-2025 |
JD-2632 |
JD-3240 |
JD-4150 |
JD-5163 |
JD-6075 |
|
| Desk
reamer |
 |
JD-40-75(Z) |
For bevelling pipes of sizes no smaller
than 3240 in press fitting (F5) installation. |
|
| Adjustable
manual pressing clamp |
 |
SYQ-1014A
|
SYQ14-20(A)
For pressing to install corresponding F5
press fitting. |
SYQ-1216A |
SYQ-1418A |
SYQ-1620A |
|
| Lengthened
manual pressing clamp |
 |
YYQB-1014¢ò
|
SYQ14-32(A)
Manual clamp with lengthened handles for
pressing to install corresponding F5 press
fitting. |
YYQB-1216¢ò |
YYQB-1418¢ò |
YYQB-1620¢ò |
YYQB-2025¢ò |
YYQB-2632¢ò |
|
| Seperated
hydraulic tool |
 |
YYFIII |
Used together with 1014-6075 clamp heads
and clamp jaws.in F5 press fitting installation. |
|
| integral
hydraulic tool |
 |
YYZ |
Used together with 1014-6075 clamp heads
and clamp jaws.in F5 press fitting installation. |
|
